Construction Management

CM 1. Construction Management Orientation

An overview of construction management education and profession. Introduction to the construction industry, career opportunities, leadership/personality assessment, sustainability, ethics, safety, community service, and university experience. (1 lecture, 2 lab hours)

Units: 2
Course Typically Offered: Fall, Spring

CM 5. Construction Materials

Introduction to basic construction materials: concrete, masonry, metals, woods, thermal materials, finishes, equipment, and specialties. (2 lecture, 2 lab hours; field trips)

Units: 3
Course Typically Offered: Fall, Spring

CM 7S. Construction Materials & Basic Building Systems

Prerequisite or corequisite: CM 15 or OSHA 30 construction safety certification. Introduction to basic construction materials and exploration of theoretic principles relating to the various building systems. Course work requires 20 hours of service learning in construction. Lectures, lab, field trips, and guest speakers. (2 Lec, 3 Lab hours)

Units: 3
Course Typically Offered: Fall, Spring

CM 15. Construction Management Software

Introduction to construction industry software and project documentation. Basic instruction in estimating, scheduling, design, and project control software. Designed to provide an overview of those particular software packages used in subsequent construction management coursework. (2 lecture, 2 lab hours)

Units: 3
Course Typically Offered: Fall, Spring

CM 18. Construction Graphics

Co-requisite: CM 7S. Introduction to fundamentals and techniques to communicate graphically in the construction industry. Plan reading, architectural drawing, sketching, drafting methods, computer aided design, and building information modeling. Survey of architectural form and function. Study includes application of building codes and regulations. (2 Lec, 3 Lab hours) (formerly CM 4)

Units: 3
Course Typically Offered: Fall, Spring

CM 20. Construction Documents

Prerequisite CM 18; CM 5 or Math 75 (may be taken concurrently). Methods for developing and applying construction contracts and specifications, including bidding requirements, bonds and insurance, certificates, agenda, change orders, general and supplementary conditions, and CSI specifications; Performing basic quantity take offs for a given set of construction documents. (2 lecture, 2 lab hours)

Units: 3

CM 31. Architectural Graphics

Prerequisite: CM 5. Introduction to basic techniques and media used in architectural graphic communication including: perspective techniques, sciagraphy, models, and photography; emphasis on various ways of making drawn representations of architectural design proposals. (6 lab hours)

Units: 3
Course Typically Offered: Fall

CM 32. Architectural Design

Introduction to architectural design theory; analysis of architectural design problems, assessment of human needs, establishment of architectural design criteria and development of architectural design concept. (6 lab hours)

Units: 3
Course Typically Offered: Fall

CM 42. Architectural Drawing

Architectural drafting techniques and standards progressing from fundamentals to details in the area of light construction design through the use of sketching, drafting methods and computer aided design. Study includes the application of building codes and regulations. (6 lab hours)

Units: 3

CM 43. Computer-Aided Construction Detailing

Prerequisite: CM 42. Application of computers to planning and details for wood, concrete, masonry, and steel structures. (6 lab hours) (Formerly CONST 142)

Units: 3
Course Typically Offered: Fall, Spring

CM 50. Basic Building Systems

Prerequisite: CM 5, CM 42. Exploration of theoretic principles relating to the various building systems. (2 lecture, 2 lab hours; field trips)

Units: 3
Course Typically Offered: Fall, Spring

CM 105. Construction Structures

Prerequisites: CM 20; PHYS 2A or PHYS 4A; MATH 75; all with "C" or better. Properties, strength, and functional applications of basic construction materials: woods, metals, and concrete. Recent developments in new materials and applications. (2 lecture, 2 lab hours; field trips)

Units: 3
Course Typically Offered: Fall, Spring

CM 107. Advanced Construction Structures

Prerequisite: CE 20 or CM 105. Analysis of construction materials in its application to different structural systems. (2 lecture, 2 lab hours)

Units: 3
Course Typically Offered: Fall, Spring

CM 107L. Advanced Construction Structures Lab

Prerequisite or corequisite: CM 107. Application of principles and methods of testing to verify theory and determine limitations of principles of construction materials.

Units: 1

CM 110. Estimating and Bidding

Prerequisite: CM 20. Basic method used to evaluate, fix cost, calculate worth, make accurate quantity take-offs and labor time estimates; preparing bids for prospective buyers. (2 lecture, 2 lab hours)

Units: 3
Course Typically Offered: Fall, Spring

CM 116. Construction Scheduling

Corequisite or Prerequisite: CM 110. Critical path method; planning, scheduling, and control of construction projects including logic, time assignment and computation, analysis, replanning, diagramming practices, monitoring and updating, computer utilization; role of management. (2 lecture, 2 lab hours)

Units: 3
Course Typically Offered: Fall, Spring

CM 122. Construction Laws

Prerequisite: CM 20. Orientation to the rules and regulations governing construction industry practices and activities including contractors license law, state lien laws, health and safety regulations, personnel relations and supervision, workers compensation, employment insurance and taxes.

Units: 3

CM 124. Construction Labor Law

Prerequisites: CM 122. Study of federal and state labor-oriented regulations as applied to construction industry practices. Interaction between technical and legal aspects of collective bargaining, pre-hire agreements, hiring hall referrals, open shop construction, work force managemnet, labor standards, employment discrimination, strikes, and picketing.

Units: 3
Course Typically Offered: Fall

CM 127. Construction Soils and Foundation

Not open to civil engineering majors. Prerequisite: CM 107. Physical and mechanical properties of soil, construction applications of soils engineering design, field control during construction, field problems and remedial measures, and case histories.

Units: 3

CM 131. Advanced Architectural Graphics

Prerequisite: CM 7S and upper division standing. Architectural graphic techniques as tools of three dimensional analysis and representation in the design process. (6 lab hours)

Units: 3
Course Typically Offered: Spring

CM 132. Advanced Architectural Design

Prerequisite: CM 131 and upper division standing. Development of understanding of the forces affecting the man-made environment through function identification, systems analysis, and development of architectural design solutions to problems at an intermediate level of complexity. (6 lab hours)

Units: 3

CM 134. Architectural Design Problems

Prerequisites: CM 116, CM 132. Conceptual planning and design of a large scale architectural project responding to the built environment. Employing team research and analysis leading to the design and presentation on individual solutions with graphic and three-dimensional techniques. (6 lab hours)

Units: 3

CM 140. Building Mechanical, Electrical, and Plumbing

Prerequisites: CM 7S and CM 20. Survey of building mechanical, electrical, and plubming systems. Orientation to the design fundamentals and construction of various sustainable and environmentally friendly systems and equipment. Lectures, field trips, and guest speakers. (2 Lec, 3 Lab hours)

Units: 3

CM 144. Construction Site Planning and Development

Prerequisite: CM 116; senior standing. Analysis of land development; site investigation, grading, street piping systems, and landscaping. (2 lecture, 2 lab hours; field trips)

Units: 3
Course Typically Offered: Fall, Spring

CM 150. Building Construction

Prerequisites: CM 116; CE 121. Problems and methods of solutions in the construction of buildings; site; excavations, foundations, framework, timber, reinforced concrete, structural steel, masonry construction and related elements. Satisfies the senior major requirement for the B.S. in Construction Management. (2 lecture, 2 lab hours; field trips)

Units: 3

CM 151. Heavy Civil Construction

Prerequisites: senior standing or permission of instructor; CM 116; CE 121, CE 127. Problems and methods of solutions in heavy construction from earth moving, paving, compacting to tunneling; administrative procedures, quantity surveying, estimating, scheduling, and bidding. ( 2 lecture, 2 lab hours, field trips)

Units: 3
Course Typically Offered: Fall

CM 160. Plumbing Systems

Prerequisite: CM 20; PHYS 2B or MATH 76, all with grade of C or better. Construction application of water systems, plumbing and storm drainage, and sewage disposal systems. (1 lecture, 2 lab hours; field trips) (Formerly CM 166)

Units: 2

CM 162. Mechanical Systems

Prerequisites: CM 160 with grade of C or better. Mechanical systems for heating, ventilating, air conditioning, plumbing, storm drainage, and sewage disposal systems in commercial, industrial, residential construction; heat loss and gain, solar systems, mechanical system sizing, and life cycle cost analysis. Lectures, field trips, and guest speakers. (1 lecture, 2 lab hours; field trips)

Units: 2
Course Typically Offered: Fall

CM 164. Building Electrical Systems

Prerequisites: CM 20; PHYS 2B or MATH 76 all passed with grade of C or better. Electrical systems for power, light, heat, signals, and communications in commercial, industrial, and residential buildings. (1 lecture, 2 lab hours; field trips)

Units: 2
Course Typically Offered: Spring

CM 170. Construction Project Controls

Prerequisite: CM 116. Development and application of contruction project control systems; principles of construction project and business management; methods of cost, schedule, quality, safety, and change management; survey of construction accounting and finance. (2 Lec, 2 Lab hours)

Units: 3
Course Typically Offered: Fall

CM 177. Sustainable Construction

Prerequisite: CM 7S. To provide an overview of emerging delivery systems for high performance green buildings and the basis on which their sustainability can be evaluated. Green Building rating systems will be discussed. Lectures, lab, field trips, and guest speakers. (2 Lec, 2 Lab hours)

Units: 3
Course Typically Offered: Fall

CM 180A. Construction Management Capstone 1

Prerequisites: CM 116, CM 122, Senior Standing. Corequisites or Prerequisites: CM 107, CM 193, MGT 104. Prepare conceptual design, implementation of sustainable materials, assess construction components and utilize various planning approaches for a building project. Lab, field trips and guest speakers (3 lab hours)

Units: 1
Course Typically Offered: Fall

CM 180B. Construction Management Capstone 2

Prerequisite: CM 170 and CM 180AS. The construction manager's relation to internal organization, owner, architect, engineer, public, press, legal aid, unions, trades, equipment, utilities, insurance, finances, government, and others. Lectures, lab, field trips, and guest speakers. (Formerly CONST 114) (2 Lec, 3 Lab hours)

Units: 3
Course Typically Offered: Fall, Spring

CM 181. Construction Management Senior Seminar

Prerequisite: Senior Standing. Presentation and discussion of current construction management practices. Standards of professionalism, leadership, and ethics. Professional practice issues and professional licensure.

Units: 1

CM 190. Independent Study

See Academic Placement -- [-LINK-]. Approved for SP grading. (Course fee variable)

Units: 1-3, Repeatable up to 6 units
Course Typically Offered: Fall, Spring

CM 191T. Technical Topics in Construction

Prerequisite: permission of instructor. Investigation and analysis of selected subjects in construction. (2-6 lab hours)

Units: 1-3, Repeatable up to 6 units

CM 191T. BIM for CM

This course is an introduction to building information modeling (BIM) and its implementation in pre-construction and construction operation management. Topics include the fundamentals of information modeling; business benefits of BIM; impacts of BIM on design and construction processes; BIM execution and integrated project delivery; model-based spatial coordination, cost estimating and scheduling, and cutting-edge BIM technology development and career opportunities with BIM. (Offered Fall 2018)

Units: 3

CM 191T. Construction Management Team Building

Team building and problem specific preparation for construction management competitions. Course will focus on developing skills for teamwork, leadership, public speaking, and proposal preparation, as well as problem specific technical skills. (Offered Fall 2018)

Units: 1-3, Repeatable up to 6 units

CM 193. Internship/Work Experience

Open only to construction majors. Prerequisites: sophomore standing and permission of instructor. Supervised work experience in construction related industries. Periodic consultations with instructor.

Units: 1, Repeatable up to 3 units
Course Typically Offered: Fall, Spring